Precio de fábrica China proveedor agacharse pipa que forma la máquina
Tipo de Pago: | L/C,T/T |
---|---|
Cantidad de pedido mínima: | 1 Set/Sets |
Plazo de entrega: | 60 días |
Paquete: | Embalaje del contenedor de la línea conveniente para el envío en el extranjero |
---|---|
Marca: | Encontrar |
Lugar de origen: | Zhejiang, China (continente) |
Capacidad de suministro: | 15 Set/Sets per Month |
Descripción del producto
1. Componentes y función
Coil Feeding Equipment |
Consists of uncoiler and its base. The steel sheet is manuall feed to the guiding equipment under the function of friction and traction |
Guiding Equipment |
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment. |
Mainframe Transmission |
Transfer the main motor power to the rollers through chains and sprockets,and also transfer the coil sheet. |
Roll forming system |
The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface. The rollers are surface-chromeplated after being machined by the exact machine tool. |
Post Cut Equipment |
The length and blocks can be set through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting. |
Hydraulic Station | Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power. |
PLC Control Panel |
The electric controlling system of this machine consists of five parts: operating system, screen, PLC, transducer and strong electricity part. The controlling system of this machine are imported from Mitsubishi company of Japan. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. |
Supporter Table | To support the finished panels. The quantity we supply is 2 pieces with length 2000mm, it can support panels with 8000mm at normal condition. |
2 Flow
de trabajo la hoja de la bobina---hoja guía tubo---Roll formando---longitud medida---el tubo---corte el tubo de sujeción---al funcionamiento hacia fuera de la mesa
3 equipo estándar de máquina
Coil Feeding Equipment | 1set |
Guiding Equipment | 1set |
Mainframe Transmission | 1set |
Roll forming system | 1set |
Post Cut Equipment | 1set |
Hydraulic Station | 1pc |
PLC Control Panel | 1pc |
Supporter Table | 2pc |
principal
Roller Material |
High grade No.45 forged steel,with digital-controlled procession,Panted with hard chromel coated. |
Active Shaft Material |
High grade No.45 carbon wrought steel which can improve the integrated mechanical feature of the shaft. |
Electric Elements |
PLC control panel, transducer imported from Mitsubishi of Japan. Other elements from famous suppliers in China |
Cutter blade |
Cr12 mold steel with quenched treatment |
5. Parámetro técnico principal
Suitable materials thickness |
0.4--0.6mm colored steeel sheet |
Roll forming Speed |
15m/min(Depend on final design) |
Cutting Tolerance |
≤±2mm ( length≤ 5000mm) |
Power Requirement |
Main motor power: 5.5Kw Hydraulic station power: 4 Kw |
Roller Stations |
about 20 stands (Depend on final design) |
Hydraulic station press |
10~12 Mpa |
Cut off forms |
hydraulic drive, after forming cutting |
Cutting blade |
Cr12 after quenched treatment |
Control system |
PLC control |
Main body |
9300 * 880 * 1100mm(to be confirmed to the finial design) |
Total weight |
About 9000kg (to be confirmed to the finial design) |
Voltage |
380V 3Phase 50HZ |
si usted tiene interesante no dude en ponerse en contacto conmigo.
Grupos de Producto : Perfiladora de máquinas > Abajo pipa / tubo formando equipo
Premium Related Products